Shop
-
KSF EV-300 | Palonnier electro-pneumatique pour verre (300 kg) – Compatible avec GRM 250
The EV-300 electro-pneumatic glass cradle is an autonomous device intended for the handling of all glass on site or in the workshop.
Due to its design, it also adapts without modification to the GRM 250 glass robot replacing the manual pump suction cups.
In order to comply with regulations:
- Double air circuit (each circuit has its own supply).
- Each air circuit is connected to its set of suction cups (blue and red pipes)
- Double visual and audible alarm system in case of airdrop
- Double vacuum level indicator
300 mm diameter suction cups:
- With specific seals to limit the impact of the product on the glazing
- Adjustable position on each support arm (each arm is also adjustable on the structure)
- With individual protective cover
€2,550.00 hors TVA -
KSF GLS-520 | Portable glass lifter for patio-roof (70 kg, 3.4m)
Load capacity
with an angle of 80°Lifting
Height
horizontalDimensions repliées Dimension
operatingLifter weight Cradle
weight70 kg / 3 m 5.2 m 380 x 380 mm 1500 x 1500 mm 38 kg 15 kg - No need to use any tools for the operation
- It take only 30 seconds to complete machine set-up.
- Telescoping masts
- The overall stability is ensured by 4 feet equipped with locking wheels for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Can be transported by van or estate car
- Electric lifting motor 110 V or 230 V , remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic Overload clutch, to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately
Cradle with 2 vacuums
· Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg
A red line on the pump’s plumger serves as a vacuum indicator€2,470.00 hors TVAKSF GLS-520 | Portable glass lifter for patio-roof (70 kg, 3.4m)
€2,470.00 hors TVA -
KSF GLS340 | Portable glass lifter for patio-roof (3.40m, 70 kg)
Load capacity
with an angle of 80°Lifting
Height
horizontalDimensions repliées Dimension
operatingLifter weight Cradle
weight70 kg / 3 m 3.4 m 300 x 300 mm 1000 x 1000 mm 24 kg 15 kg - No need to use any tools for the operation
- It take only 30 seconds to complete machine set-up.
- Telescoping masts
- The overall stability is ensured by 4 feet equipped with locking wheels for use also on sloping ground
- A level ensure the proper set-up while adjusting the feet
- Can be transported by van or estate car
- Electric lifting motor 110 V or 230 V , remote control with variable speed switch.
- Manual operation is possible in case of power failure
- Automatic Overload clutch, to prevent over weight loading
- Emergency stop button: Pressing this button stops raising or lowering immediately
Cradle with 2 vacuums
· Safety suction pump, diameter 200 mm (certified TÜV and GS) unit capacity 65 kg
A red line on the pump’s plumber serves as a vacuum indicator€2,220.00 hors TVAKSF GLS340 | Portable glass lifter for patio-roof (3.40m, 70 kg)
€2,220.00 hors TVA -
KSF CM520 | Élévateur électrique portable pour HVAC (jusqu'à 4,90 m, jusqu'à 140 kg)
-
Hauteur
de baseHauteur de
levageCapacité de
chargePoids
MâtDimensions
foldedDimensions
Fonctionnement1120 mm 4,9 m 140 kg / 3 m
130 kg / 4 m
90 kg / 4,9 m38 kg 380 x 380 mm 1,4 x 1,4 m - Constructed by heat treated, robust aluminum, compact, safety and reliability.
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation incase of power failure
- Automatic clutch breaker: it equipped to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- Optional platform extension
- Carry bags and transport wheels included
€1,850.00 – €1,950.00 hors TVAKSF CM520 | Élévateur électrique portable pour HVAC (jusqu'à 4,90 m, jusqu'à 140 kg)
€1,850.00 – €1,950.00 hors TVA -
-
KSF CM520 | Élévateur électrique portable pour HVAC (jusqu'à 4,90 m, jusqu'à 140 kg)
Hauteur
de baseHauteur de
levageCapacité de
chargePoids
MâtDimensions
foldedDimensions
Fonctionnement1120 mm 4,9 m 140 kg / 3 m
130 kg / 4 m
90 kg / 4,9 m38 kg 380 x 380 mm 1,4 x 1,4 m - Constructed by heat treated, robust aluminium, compact, safety and reliability with Telescoping masts
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
- Motor 230 V or 110 V – 50 / 60 Hz
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button. Press the button for stop raising / lowering immediately.
- Manual operation in case of power failure
- Automatic mechanical overload breaker: it equipped to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- option wheels and platform extension
€1,720.00 – €1,820.00 hors TVAKSF CM520 | Élévateur électrique portable pour HVAC (jusqu'à 4,90 m, jusqu'à 140 kg)
€1,720.00 – €1,820.00 hors TVA -
KSF CM520 | Electric portable Lifter (up to 140 kg / up to 4.9 m)
Hauteur
de baseHauteur de
levageCapacité de
chargePoids
MâtDimensions
foldedDimensions
Fonctionnement1120 mm 4,9 m 140 kg / 3 m
130 kg / 4 m
90 kg / 4,9 m38 kg 380 x 380 mm 1,4 x 1,4 m - Constructed by heat treated, robust aluminum, compact, safety and reliability.
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately.
- Manual operation incase of power failure
- Automatic clutch breaker: it equipped to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- Roues de transport optionnelles et extension de plateform
- Sacs de transport inclus
€1,720.00 – €1,820.00 hors TVAKSF CM520 | Electric portable Lifter (up to 140 kg / up to 4.9 m)
€1,720.00 – €1,820.00 hors TVA -
KSF BD1 | Multi-purpose foldable material lift (180 kg, 3m)
Load capacity up to 3 m 180 kg Weight without accessories 60 kg Lifting height
with load fork above
mit load fork under
with platform2.88 m
3.35 m
3 m- Aluminium mast (anti-twist rails) with steel pulleys
- Immediate use on site
- Removable feet for easy transport in vehicle
- Manual winch with automatic brake and special lifting steel wire
- Easy transport on site
- Legs with swivel wheels Ø 76 mm and provided with a brake
- Two wheels Ø 250 mm with adjustable wheels base up to 1060 mm for improved stability with load
- Blocking mast during transport in vehicle
Included:
- Adjustable lifting fork
Optional Lifting accessories :
- Hook
- Platform for Beam or roller shutter carrier
- Glass cradle up to 180 kg
€1,550.00 – €1,800.00 hors TVAKSF BD1 | Multi-purpose foldable material lift (180 kg, 3m)
€1,550.00 – €1,800.00 hors TVA -
KSF DW520 | Élévateur électrique pour plaques de plâtre (5,1 m)
- The distance of two arms up to 3,58 m to take sheets up to 4′ x 16′.
- It’s can be operate in horizontal, vertical and ceiling positioning.
- Vertical loading height without ground clearance.
- Mounted on wheels of caster with break for easily movement.
- Set-Up without tools : The legs can be release or fold in seconds without tools.
- Telescoping legs versatile and infinitely adjustment, available use in uneven ground, like stairway.
- Electric remote control with variable speed switch
- The variable speed control helps making micro adjustment as well as soft starting the installation.
- Emergency Stop Button, for stop raising / lowering immediately in case of emergency.
- Manual operating in case of power failure.
- Completely portable, light weight design to easy carry and transport it.
- Telescoping Mast : constructed by heat treated, robust aluminum, compact and reliability.
- Automatic Overload breaker: it equipped to prevent to over weight loading.
- Voltage 230 V or 110 V – 50 / 60 Hz.
- Cradle load capacity : 70 kg – Cradle weight 12 kg
- Distance of two arms with outriggers 3,58 m
€1,780.00 hors TVAKSF DW520 | Élévateur électrique pour plaques de plâtre (5,1 m)
€1,780.00 hors TVA -
KSF CM340 | Élévateur électrique portable pour stores (jusqu'à 130 kg, jusqu'à 3,30 m)
Hauteur
de baseHauteur de
levageCapacité de
chargePoids
MâtDimensions
foldedDimensions
Fonctionnement970 mm 3,3 m 130 kg / 3,0 m
120 kg / 3,3 m21 kg 300 x 300 mm 1,1 x 1,1 m - Constructed by heat treated, robust aluminum, compact, safety and reliability with Telescoping masts
- Set-Up without tools, the legs can be release or fold in seconds without tools.
- 4 Legs, versatile and infinitely adjustment, available use in uneven ground with special design can let you working close to the wall (design UPTER)
- Motor 230 V or 110 V – 50 / 60 Hz
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button. Press the button for stop raising / lowering immediately.
- Manual operation incase of power failure
- Automatic mecanical overload breaker: it equipped to prevent to over weight loading.
- Level to ensure the proper set-up while and adjusting the telescoping legs
- option wheels and platform extension
- included: trasport bag
€1,400.00 – €1,600.00 hors TVAKSF CM340 | Élévateur électrique portable pour stores (jusqu'à 130 kg, jusqu'à 3,30 m)
€1,400.00 – €1,600.00 hors TVA -
KSF DW340 | Electric Drywall Lifter (up to 3.3 m)
- The distance of two arms up to 3,58 m to take sheets up to 4′ x 16′.
- It’s can be operate in horizontal, vertical and ceiling positioning.
- Vertical loading height without ground clearance.
- Mounted on wheels of caster with break for easily movement.
- Set-Up without tools : The legs can be release or fold in seconds without tools.
- Telescoping legs versatile and infinitely adjustment, available use in uneven ground, like stairway
- Electric remote control with variable speed switch
- The variable speed control can be soft start or adjust the micro operating height.
- Emergency Stop Button, for stop raising / lowering immediately in case of emergency.
- Manual operating in case of power failure.
- Completely portable, light weight design to easy carry and transport it.
- Telescoping Mast : constructed by heat treated, robust aluminum, compact and reliability.
- Automatic Overload breaker: it equipped to prevent to over weight loading.
- Voltage 230 V or 110 V – 50 / 60 Hz.
- Cradle load capacity : 70 kg – Cradle weight 12 kg
- Distance of two arms with outriggers 3,58 m
€1,570.00 hors TVAKSF DW340 | Electric Drywall Lifter (up to 3.3 m)
€1,570.00 hors TVA -
KSF CM439 | Élévateur électrique (130 kg / 3 m – 90 kg / 4,3 m) | Pour stores, HVAC, matériaux
Hauteur
de baseHauteur de
levageCapacité de
chargePoids de la machine
mât1150 mm 4,27 m 130 kg / 3 m
120 kg / 4 m
90 kg / 4,3 m26 kg €1,490.00 hors TVA -
KSF CM340 | Élévateur HVAC / climatiseur (jusqu'à 3,30 m, jusqu'à 130 kg)
Hauteur
de baseHauteur de
levageCapacité de
chargePoids
MâtDimensions
foldedDimensions
Fonctionnement970 mm 3,3 m 130 kg / 3,0 m
120 kg / 3,3 m21 kg 300 x 300 mm 1,1 x 1,1 m - Roues de transport optionnelles et extension de plateform
- Sacs de transport inclus
€1,250.00 – €1,450.00 hors TVAKSF CM340 | Élévateur HVAC / climatiseur (jusqu'à 3,30 m, jusqu'à 130 kg)
€1,250.00 – €1,450.00 hors TVA
Français 
English (UK) 
Deutsch 
Italiano 
Español